Pool chemistry gets called “simple” right up until a clear pool turns milky, a filter pressure gauge shoots up, or a perfectly good cartridge comes out feeling like it turned to stone. We move fast through the most common chemical misconceptions we see in the pool industry and explain the real reactions underneath, so you can prevent damage instead of explaining it after the fact. We start with cyanuric acid (CYA) and the assumption that stabilizer only drops when you drain and refill. There...

Show Notes

Pool chemistry gets called “simple” right up until a clear pool turns milky, a filter pressure gauge shoots up, or a perfectly good cartridge comes out feeling like it turned to stone. We move fast through the most common chemical misconceptions we see in the pool industry and explain the real reactions underneath, so you can prevent damage instead of explaining it after the fact.

We start with cyanuric acid (CYA) and the assumption that stabilizer only drops when you drain and refill. There’s more to the story: under certain conditions, bacteria can convert cyanuric acid into ammonia, and your CYA can crash, especially after winter.  From there we hit calcium chloride and why it heats up aggressively, plus the practical rule that saves you from a cloud-out: don’t stack calcium additions right next to pH up or alkalinity increaser and accidentally spike the LSI.

On acid washing, we cover a simple basin tactic with soda ash that can prevent an ugly deep-end “burn ring,” and a small step to reduce rust staining from a submersible pump. We also clarify what phosphate removers really do, how lanthanum phosphate fallout clouds water, and why filter cleaning is part of the process. We close with the most important safety warning of all: never mix trichlor with cal hypo, especially in confined spaces like feeders or skimmers.

• cyanuric acid not always only lowered by draining, bacterial conversion to ammonia as a real cause of CYA loss
• calcium chloride as an exothermic product, burn risk and why timing matters
• avoiding LSI spikes by separating calcium additions from pH and alkalinity adjustments
• chlorine wash best practices, dilution and thorough rinsing to prevent alkaline film
• how poor rinsing after a chlorine wash can destroy DE grids and cartridge pleats
• acid wash basin protection, using a trichlor bucket lid under the pump to reduce rust staining
• preventing a deep-end plaster burn ring by loading the basin with soda ash
• phosphate removers as lanthanum chemistry, expected clouding, fallout, and filter pressure rise
• trichlor

Send us Fan Mail

Support the Pool Guy Podcast Show Sponsors! 

HASA 
https://bit.ly/HASA

The Bottom Feeder. Save $100 with Code: DVB100
https://store.thebottomfeeder.com/

Try Skimmer FREE for 30 days:
https://getskimmer.com/poolguy 

Get UPA Liability Insurance $64 a month! https://forms.gle/F9YoTWNQ8WnvT4QBA

Pool Guy Coaching: https://bit.ly/40wFE6y





Support the show

Thanks for listening, and I hope you find the Podcast helpful! For other free resources to further help you:
Visit my Website: https://www.swimmingpoollearning.com
Watch on YouTube: https://www.youtube.com/@SPL
Podcast Site: https://the-pool-guy-podcast-show.onpodium.com/

UPA General Liability Insurance Application: https://forms.gle/F9YoTWNQ8WnvT4QBA

Pool Guy Coaching Group

Join an exclusive network of Pool Service Technicians to access the industry’s leading commercial general liability insurance program. Protect your business.

Premium is $64 per month per member (additional $40 for employees and ICs)

$59 per month for Pool Guy coaching Members - join here! https://www.patreon.com/poolguycoaching

Limits are $1,000,000 in occurrence and $2,000,000 in the aggregate - Per member limits

     [ $1,000,000 per occurrence and $4,000,000 aggregate available for $75 per month ]

$50,000 in HazMat Coverage - clean up on-site or over-the-road

Acid Wash Coverage - Full Limits

Listen On

Also In Season 10